基于最小包容区域的球度误差评定方法

针对球度误差评定方法存在原理误差或模型误差,提出了一种符合最小包容区域定义的球度误差评定方法,即将几何搜索逼近算法与基于最小包容区域法的球度误差评定的几何结构和定义结合起来的准确评定方法。对仿真数据和其他文献中的数据进行了评定。所提方法与其他方法的评定结果表明,所提方法可以准确地找到最小包容区域球的球心并给出球度误差的精确解。     

谈如何在预可研阶段做好工程造价控制

工程造价控制是现代工程建设、管理的核心工作之一,要求在现有基础上不断予以完善。本文以预可研阶段工程造价控制作为分析对象,论述该阶段工程造价控制的关键点,再以此为基础,分析预可研阶段的工程造价控制思路,最后从递进关联的角度,就工程造价控制的后续方法进行论述,给出构建精细化作业模式、加强数据挖掘和复用、重点项目的拆分等内容,服务后续工作。     

XJM-KS型浮选机矿化器负压产生机理研究

浮选机矿化器是用于浮选矿浆预处理的重要设备，其性能的优劣直接影响到浮选机的工作效果。文章通过流体力学仿真软件FLUENT对XJM-KS型浮选机矿化器的内部流场进行数值仿真，重点研究了聚焦式喷嘴布置所带来的流场特征。模拟结果表明，高速的矿浆射流能够在混合室内产生-2.43×10Pa的负压区，从而吸入大量的空气，实现空气与矿浆的有效混合与预矿化，与传统的机械搅拌式矿浆预处理装置相比，该矿化器能够大幅度提高预矿化效果。     

A benchmark data set for two-phase Coriolis metering

For more than a decade there has been growing interest in the use of Coriolis mass flow metering applied to two-phase (gas/liquid) and multiphase (oil/water/gas) conditions. It is well-established that the mass flow and density measurements generated from multiphase flows are subject to large errors, and a variety of physical models and correction techniques have been proposed to explain and/or to compensate for these errors. One difficulty is the absence of a common basis for comparing correction techniques, because different flowtube designs and configurations, as well as liquid and gas properties, may result in quite different error curves. Furthermore, some researchers with interests in the modelling aspects of the field may not have suitable multiphase laboratory facilities to generate their own data sets. This paper offers a small data set that may be used by researchers as a benchmark i.e. a common data set for comparing correction techniques. The data set was collected at the UK National Flow Laboratory TUV-NEL, using air and a viscous oil, and provides experimental points over a wide flow range (8:1 turndown) and with Gas Volume Fraction (GVF) values up to 60%. As a first investigation using the benchmark data set, we consider how data sparsity (i.e. the flow rate and GVF spacing in the experimental grid) affects the accuracy of a correction model. A range of neural network models are evaluated, based on different subsets of the benchmark data set. The data set and some exemplary code are provided with the paper. Additional data sets are available on a web site created to support this initiative.     

Shear and extensional rheology of selected polysaccharides

Rheology is used for the elucidation of the flow properties of polysaccharide solutions. For a given polysaccharide, both shear and extensional rheological experiments should be performed for the full characterisation of its flow properties. The provided information will facilitate the efficient exploitation of a polysaccharide in various applications. Although shear rheology is widely used in polysaccharides’ characterisation, there are only limited extensional rheology studies due to lack of reliable techniques in the formation of pure extensional flow. However, recently, several commercial extensional rheometers have been developed and thus, accurate extensional experiments can now be performed. The present work initially presents the principles and concepts of both shear and extensional rheology and then reports rheological findings for solutions of various polysaccharides and their derivatives. Xanthan and various members of the galactomannan, cellulose and alginate families were selected.     

航天发动机叶片电解加工流场设计和试验研究

电解加工作为整体构件制造的主要技术之一,其流场设计的合理性将严重影响电解加工过程的稳定性、加工效率和质量。针对航天发动机叶片式扩压器设计了部分阻隔式反W型流场,并开展了与侧流式和反W型流场的仿真比较。仿真结果表明,该流场方式可以保证加工区电解液的高速流动,并能有效避免进/排气边漏液现象。最后,在部分阻隔式反W型流场中开展了叶片式扩压器电解加工试验,在阴极进给速度为0.5 mm/min时加工出了扩压器叶片,验证了流场设计的合理性。     

Mixed convection flow of a Maxwell nanofluid with Hall and ion‐slip impacts employing the spectral relaxation method

This article investigates the Hall and ion‐slip impacts on the mixed convection flow of a Maxwell nanofluid over an expanding surface in a permeable medium. The impacts of Brownian movement and thermophoresis parameters, Soret, Dufour, viscous dissipation, chemical reaction, and suction parameters, are, moreover, considered. Using the similitude changes, the partial differential equations with regard to the momentum, energy, and concentration equations are transformed to an arrangement of nonlinear ordinary differential equations, which are handled numerically utilizing a spectral relaxation method (SRM). The impacts of noteworthy physical parameters on the velocities, thermal, and concentration distributions are investigated graphically. Moreover, the numerical values of skin‐friction coefficients, local Nusselt number, and Sherwood number for different values of the mixed convection parameter $\left(\gamma \right),$ Deborah number $\left(\lambda \right),$ Hall parameter $({\beta }_{\mathrm{H}}),$ ion‐slip parameter $({\beta }_{\mathrm{i}}),$ Dufour number (Du), and Soret number $\left(\mathit{Sr}\right)$ are computed and tabulated. It is discovered that ascent in Deborah number reduces both the stream and transverse velocity profiles, while the inverse pattern is seen with augmentation in the mixed convection parameter. In addition, inverse patterns of the stream and transverse velocity profiles are seen with expansion in magnetic, Hall, and ion‐slip parameters. Besides this, the temperature and concentration disseminations decline with augmentation in Dufour number and chemical reaction parameters, respectively. It is likewise seen that both the skin‐friction coefficients lessen with expansion in Deborah number, and they ascend with upgrade in blended convection and ion‐slip parameters, while the opposite condition is noticed with augmentation in Hall parameter. Furthermore, the reverse trends of local Nusselt and Sherwood numbers are discovered with expansion in the Dufour and Soret numbers.     

高速激光热丝钎焊表面成形质量的控制

高速激光钎焊会引起熔池流动紊乱导致焊缝成形质量恶化,从而限制了其在汽车制造领域的应用。通过正交试验研究了高速下激光功率、送丝角度等工艺参数对焊缝成形质量的影响,发现焊缝成形质量随激光功率增加和送丝角度减小而提升。激光功率是通过影响熔池获得的热输入,从而影响熔池表面扰动的铺展来影响焊缝成形质量的。送丝角度是通过影响焊丝送入熔池的位置,从而影响焊丝对熔池的扰动强度和扰动的铺展速度来影响焊缝成形质量的。采用正交试验获得的最优工艺参数组合进行试验,获得了表面光滑平整无缺陷的高质量焊缝,为激光钎焊在高速下的应用发展奠定了基础。     

超临界CO2环境中温度和流速对N80碳钢腐蚀行为的影响

目的研究超临界CO2环境中温度和流速对N80碳钢腐蚀行为的影响,探讨N80碳钢在超临界CO2环境中的腐蚀机制。方法利用高压釜进行失重和电化学测试,同时利用扫描电子显微镜(SEM)和X射线衍射仪(XRD)进行腐蚀形貌观察和腐蚀产物成分分析。结果当温度为40℃时,腐蚀速率最小,电化学阻抗随时间延长持续减小,此条件下并没形成FeCO3保护膜。升高温度导致腐蚀初期的腐蚀速率明显增大,然而腐蚀某个时刻后,电化学阻抗突然增大,意味着FeCO3保护膜的形成。温度越高,腐蚀24 h后的阻抗越大,产物膜越致密,保护性越好。另外,腐蚀失重速率随流速的增加而增大,电化学测试也表明流速越大,阻抗越小,腐蚀电流密度越大。SEM形貌分析表明,流体流动破坏了FeCO3膜的致密度,降低了其对N80碳钢基体的保护作用。结论尽管升高温度加速了N80碳钢的腐蚀,但却有利于保护性FeCO3膜的形成。温度越高,FeCO3膜越致密。流体流动破坏了保护性FeCO3膜的致密性,加速了N80碳钢腐蚀。     

热轧双相钢生产现状、存在问题及发展趋势浅析

介绍了国内外热轧双相钢的发展现状；对热轧双相钢的成分体系和关键生产工艺进行了总结，指出了目前热轧双相钢在生产过程中存在的问题；提出了未来热轧双相钢的主要发展方向为低成本、高强度、低负荷、高表面质量和“以热代冷”。